Zoho Creator-

Multipoint Lock System Questionaire

Date - Time 1	[dd-MMM-yyyyHH:mm:ss]
This form was built to help you order your multipoint locks from All About Doors and Windows. Please read this multipoint lock FAQ before entering any data. Contact Details
Name *
Email *
Address
City, State Zip
Phone
Fax
General Lock Info Which do you see stamped on the thin, edge of the metal face plate running up the entire door edge, "FUHR", "HOPPE " etc.? (This can be found in between the door latch and deadbolt area).
Brand Name
Faceplate Finish
If you know your door manufacturer, please list it. If not, list the manufacturer of the windows in your house. If you don't know either, leave blank.
Door Manufacturer
Year or Age of Door
Single or Double Door
Common door thicknesses are 1-3/4 Inch and 2-1/4 Inch
Door Thickness
The common widths of the metal faceplate are 5/8" and 25/32"
Faceplate Width
Is this an automatic or manual door? Manual: Must first pull up on handles to operate multipoint locks. Automatic: the multipoints engage on their own when you close the door. Automatic version will also have a small roller-like piece located approximately 7-8 inches above the latch.
Manual or Automatic
Please view this document to help you decide which type of lock you are dealing with before continuing and I recommend keeping it open to help you answer the remaining questions.
Multipoint Lock Type
Door Handle Location
Gear Info
What is the distance from the center of the handle down to the center of the thumbturn piece? Common ones are 3.62 inches(92mm), 2.38 inches(72mm), and 2.75" inches(70mm).
Handle to Thumbturn Distance
What is the distance from the center of the handle to the edge of the door with the latch and deadbolt on it?
Backset
With the door ajar, measure how far out the deadbolt extends from the edge
Deadbolt Extends
Measure the distance from the center of the handle to the bottom of the door.
Handle Height
Locking Position - Bottom Gear
For tongue version only: What is the distance from the center of the handle down to the bottom tongue position? Common: 24.41 inch(620mm), 26.42 inch(671mm) and 29.65 inch(753mm)
Bottom Tongue Measurement
For the roller version only(2 or 4 roller, manual or automatic): What is the distance from the center of the handle down to each roller? Common: 15.75 Inch(400mm), 29.53 Inch(750mm). For the four roller version, please list both measurements.
Bottom Roller(s) Position
For the roundbolt version only: What is the distance from the center of the handle down to the center of the roundbolt? Common: 26.30 Inch(668mm)
Bottom Roundbolt Measurement
Locking Position - Top Extension
Door Height
For tongue version only: What is the distance from the center of the handle up to the top tongue position? Common: 24.25 inch(743mm) and 37.20 inch(945mm)
Top Tongue Measurement
For the roller version only(2 or 4 roller, manual or automatic): What is the distance from the center of the handle up to each roller? Common: 15.75 Inch(400mm), 29.53 Inch(750mm). For the four roller version, please list both measurements.
Top Roller(s) Position
For the roundbolt version only: What is the distance from the center of the handle up to the center of the roundbolt? Common: 32.13 Inch(816mm), 40 Inch(1016mm), 47.87 Inch(1216mm) and 62.99 Inch(1600mm)
Top Roller Measurement
This Lock Has Shootbolts.
Comments
View Error Details
Powered by

Please view this document to help you decide which type of lock you are dealing with before continuing and I recommend keeping it open to help you answer the remaining questions.